Last Updated on September 13, 2024 by teamobn
Your home’s backyard offers all kinds of potential. If yours is nothing more than grass, then it’s time to do something about it. With some work, you can turn your backyard into a favourite gathering space or a private retreat where you go to relax and recharge after a long day. The bottom line is that your backyard can be whatever you make of it.
Thinking of ways to enhance your backyard? Then build a Backyard Barbecue! It will encourage you to get outdoors more and there’s every chance that it will also increase the value of your home!
OK, this is not an over-the-weekend project… it’s going to take a couple of hard weekends to complete. But we’re sure it will be worth the effort.
Instead of hiring a contractor to build this backyard barbecue, doing it yourself can save you a lot on costs. Aside from not having to spend on labour, you can look for used/reclaimed building materials for more savings! For example, the doors in this project are made from used pallets. Drainage consists of a barrel that they also got for free!
Now how about putting your building skills into serious practice for the next couple of weekends?
Click on any image to start the lightbox display. Use your Esc key to close the lightbox.
Materials:
- Concrete Mix
- Coarse Gravel
- Mortar
- Stucco Mix
- Bricks
- 2×4 Molds
- 4×4 Wood – roofing
- 2×6 Wood – roofing
- 2×2 Wood – roofing
- Cement Epoxy
- Rebar
- Barrel
- Drain Pipes
- Tiles
- Tile Glue
- Pallet
- Hinges
- Door/Drawer Handles
- Switches
- Stain
- Sink
- Bolts/Screws
Tools:
- Shovel
- Cement Mixer
- Carpenter’s Level
- Drill
- Trowel
- Tile Cutter
- Paint Brush
The building process of a DIY backyard barbecue
Dig and level the patch of ground where your backyard barbecue will sit. Before pouring the concrete make sure that all your water, power, and gas lines are laid, because it will be hard to get them in thereafter it is poured. Run all connections through the foundation and cap them. Ours was 3’x11′. create a form to pour the concrete in from 2×4’s
.
Mix the concrete according to the directions on the package. Pour into the mould. 
Level and smooth the concrete with another 2×4. It would be easiest to rent/borrow a cement mixer because we will be mixing a lot of them for this backyard barbecue project. 
The first thing to do is to use some cement epoxy to embed the rebar securely into the concrete foundation. drill the hole and epoxy it in. 
Next, create a dry well for the drain water to go. If you can just connect the drain for the sink to a house drain pipe, this isn’t necessary. 
Dig a deep hole that is a bit larger than the barrel that you have. Drill many holes into the barrel, and put the drain pipes through the lid. The bottom of the barrel isn’t necessary. Put the barrel into the hole and fill it with coarse gravel.
Mix up the mortar/mud and lay the first layer of bricks. They should be as close to perfectly level as possible. 
Fill around the drain pipes with cement. The barrel and drain pipes will be buried, since the area behind the backyard barbecue will be back-filled with dirt. 
Lay the next few courses of blocks, leaving an opening for doors in the front. Lay them according to the pictures below, and use a brace to hold up that middle brick above the door.
Continued Page 2…
