Spending time with family and friends outdoors is always a great bonding experience. In the fast-paced, urbane lifestyle of today, there is often limited time for maintaining relationships with some of the most important people in our lives.
Basking in nature, breathing fresh air, and enjoying a meal outdoors with them invigorates and relaxes, enhancing those precious moments we all cherish.
A great camp kitchen is a must for an amazing camping trip. It should be equipped with all the necessary cookware, utensils, and food storage containers. Furthermore, the camp kitchen should be stocked with enough food and supplies to last the entire trip.
Do you love going on picnics or camping trips with family and friends, too? Then you will surely like this camp kitchen project too as this will make cooking, eating and cleaning up while outdoors really easy. And ‘easy’ means enjoyable!
This kitchen is very portable, allowing you to fold it down to fit your camping vehicle easily. The stand is collapsible and the box is easy to use and close.
It can store all basic kitchen ingredients, cooking and cleaning equipment. The shelves inside are adjustable in case you need to change some equipment or rearrange items inside. What also makes this portable camp kitchen a winner is that it has expandable parts, giving you extra workspace at your campsite.
This project, though one that can be difficult to build for its many details, only requires common tools and materials that you most probably already own or have access to.
See how this clever idea was built and be inspired to make your very own camping kitchen!
Click on any image to start the lightbox display. Use your Esc key to close the lightbox.
You’ll need these materials:
- 3/4″ Swedish Plywood
- 1/8″ Tempered Masonite Board
- 3/8″ Luan Mahogany
- Closet Door Hinges
- Road Case Hinges
- Piano Hinges
- Hinges with removable pins
- 1-1/2″ Wood Screws
- Bolts and Nuts
- Pipe Clamp
- Natural Pine Finish
And these tools:
- Wood Clamps
- Table Saw
- Measuring Tape
Check out the steps in making your own portable camp kitchen
BOX DESIGN: I spent quite a bit of time thinking about the best design that works for me. I found many good designs on the net and borrowed features from some and added many of my own. You may not like this design so feel free to change anything you like.
1. Must fit stove and all cook/clean gear.
2. Must maximize storage space for large and small items.
3. Must maximize working counter space.
4. Must hold fresh and washed water containers.
The two top panels fold out and are supported by the swing outdoors. The doors of this portable camp kitchen double as storage space for cleaning and condiment items. I added bungees to the doors to keep things from rattling around.
The large storage compartment has adjustable shelves as does the right compartment. Nesting cooking components save space and the flip-out door design allows easy access to all components.
STAND DESIGN: Given that the design of the box would probably not allow it to collapse with equipment inside, the stand had to fold down.
1. I used door hinges with removable pins to allow the 2 halves of the stand to attach and detach from each other.
2. Sections that were removed from each side to make the stand lighter were reused for fold-down shelves.
3. The back cut-out had movable legs attached to rest across the horizontal supports.
4. Supports for a free-standing beach umbrella were added for sun shading.
5. The inside dimensions of the stand fit the outside dimensions of the box so that the box nests inside the stand against the stops.
BUILDING THE BOX: Take care to measure everything carefully! Measure twice, cut once.
Top, sides, divider, and bottom: 3/4″ Swedish plywood
Back and internal adjustable shelving: 1/8″ tempered Masonite board
Doors: 3/4″ plywood frame, 1/8″ Luan mahogany skin, closet door hinges
Handles: recessed road case hinges (1/2″ of the side had to be routed out so the handle fit flush)
Top fold-out counter: 3/4″ Swedish plywood, piano hinges recessed
The box has1-1/2″ screws that were driven through the top and bottom to hold the sides. I used bar clamps to hold everything during assembly. There was no glue used on this project.
Pre-fit the doors of your camp kitchen before assembling the box. The doors should be made a little bit shorter than the opening so they will swing out easily. I used small pieces of scrap pine for the door latches and stop.
I cut extra slots on the inside of the box to maximize the adjustability of the shelves for the future should the contents change.
The finish is natural pine with 2 coats of polyurethane.
Continued Page 2…