Building an Amazing Waist High Planter Box With These 5 Essentials

DIYWaistHighPlanter01
Waist High Planter Box

One need only spend a minute browsing Pinterest or YouTube to glimpse the ingenuity of crafters and DIYers at large. We aren’t the only ones who love to reuse items that would otherwise be headed to the landfill. And what’s not to love? DIY repurposing projects are sure winners. They can save you money, help you express creativity, and ultimately end with something you can use around your home or backyard.

For instance, this easy and inexpensive DIY waist high planter box would be a great addition to your garden. One of the most obvious benefits is that your produce is not directly on the ground. This keeps your plants safe as they are away from the critter’s reach.

KING BIRD 101" x 36" x 24" Galvanized Raised Garden Bed

Another benefit of this DIY waist high planter box is the ease of access. This is very important for those of you who have back problems. It’s difficult to tend to your plants when you’re hunching over. Watering and tilling can be such painful tasks. Building your planter box makes it easier on your back, you can customize the height to a point that is comfortable for you.

This DIY waist high planter box project doesn’t break the bank as you can use reclaimed timber from previous projects. Other hardware required is cheap and easy to find in your local hardware store.

DIY waist high planter box

Click on any image to start the lightbox display. Use your Esc key to close the lightbox. You can also view the images as a slideshow if you prefer.

Need to protect your produce from critters? Does tending to your plants make it hard for your back? Then this DIY waist high planter box project is for you!

How to Build Your Waist High Planter Box

Elevating your gardening experience to new heights is possible with a DIY waist high planter box. These elevated planters offer numerous benefits, including easier access for planting, less strain on your back, and better drainage for your plants.

Whether you’re a seasoned gardener or a novice enthusiast, constructing your waist high planter box is a rewarding project that can enhance both the functionality and aesthetics of your outdoor space.

In this comprehensive guide, we’ll explore the five essential elements you need to consider when building your waist high planter box, ensuring a successful and enjoyable gardening experience.

1. Material Selection

The first essential step in building your waist high planter box is selecting the right materials. Since your planter will be exposed to outdoor elements and potentially heavy loads of soil and plants, durability is key. Opt for materials that are weather-resistant and sturdy enough to support the weight of the soil and plants.

Cedar and redwood are popular for their natural resistance to decay and insects, making them ideal for outdoor use. Pressure-treated lumber is another option, treated with chemicals to withstand rot and decay, although it’s essential to ensure that it’s safe for use in vegetable gardens if you plan to grow edibles.

Whichever material you choose, make sure it’s free from any harmful chemicals that could leach into the soil and affect your plants.

2. Design Considerations

Once you’ve selected your materials, it’s time to consider the design of your waist high planter box. Determine the dimensions based on your available space and gardening needs. A waist high planter box typically ranges from 24 to 36 inches in height, allowing for comfortable gardening without stooping or bending over excessively.

Consider the width and depth of the planter box as well, ensuring it provides ample space for your plants to grow and thrive. Additionally, think about any special features you’d like to incorporate, such as built-in trellises for climbing plants or a bottom shelf for storing gardening tools and supplies. Sketch out your design on paper or use design software to visualize the final product before proceeding to construction.

3. Construction Process

With your materials and design in hand, it’s time to start building your waist high planter box. Begin by cutting the lumber to the desired dimensions using a saw. If you’re using untreated wood, consider applying a wood preservative or sealant to protect it from moisture and decay. Assemble the sides of the planter box using screws or nails, ensuring the corners are square and the joints are secure.

If you’re adding a bottom shelf, attach it to the frame of the planter box using additional lumber or metal brackets. Once the basic structure is assembled, drill drainage holes in the bottom to prevent waterlogging and root rot. Finally, sand any rough edges and surfaces to create a smooth finish that’s safe for handling.

4. Soil and Plant Selection

With your waist high planter box constructed, it’s time to fill it with soil and select your plants. Choose a high-quality potting mix that’s well-draining and nutrient-rich, suitable for the types of plants you plan to grow. Consider the specific needs of your plants, such as sunlight requirements, water preferences, and spacing recommendations, when selecting what to plant.

Herbs, vegetables, flowers, and even small shrubs can thrive in a waist high planter box, providing endless possibilities for creating a vibrant and productive garden. Arrange your plants according to their mature size and growth habits, ensuring they have enough space to spread out and flourish.

5. Maintenance and Care

Once your waist high planter box is filled with soil and plants, ongoing maintenance is essential to ensure its health and longevity. Regular watering is critical especially during hot and dry periods, as elevated planters tend to dry out more quickly than ground-level beds. Monitor the moisture level of the soil regularly and adjust your watering schedule as needed to keep your plants happy and hydrated.

Additionally, inspect your planter box for signs of pests, diseases, or nutrient deficiencies, and take appropriate action to address any issues promptly. Consider adding a layer of mulch to the surface of the soil to help retain moisture, suppress weeds, and regulate soil temperature.

With proper care and attention, your waist high planter box will continue to provide a bountiful harvest and bring beauty to your outdoor space for years to come.

Building your waist high planter box is a rewarding and practical project that can elevate your gardening experience and enhance the beauty of your outdoor space. By considering the five essentials outlined in this guide – material selection, design considerations, construction process, soil and plant selection, and maintenance and care – you can create a functional and aesthetically pleasing garden bed that’s tailored to your specific needs and preferences.

    Timber:

    • 6 pieces 2x4x96 Kiln Dried Pine studs
    • 2 pieces 1x8x12 Cedar Board
    • 3 pieces 1x8x8 Cedar Board
    • 1 piece 1x4x12 Cedar Board
    • 1 piece 1x4x10 Cedar Board

    Fasteners:

    • Box (100 pieces) of 1-1/4″ Star Drive All Weather Self Tapping Screws
    • 2-1/2″ Kreg All Weather Self Tapping Pocket Hole Screws
    Land Guard Galvanized Raised Garden Bed Kit

    Tools:

    • Table Saw
    • Mitre Saw
    • Power Drill
    • Kreg Pocket Hole Jigs and Clamp
    • Wood Glue
    • Set Square
    • Pencil/Pen
    • A 4’ clamp and a 6″ clamp – optional, better if you have one
    • Measuring Tape
    • 5/8″ Forstner Bit – for drain holes
    • Protective Equipment – safety glasses, dust mask, etc.

    Steps to make a DIY waist high planter box:

    The first thing to do when building this DIY waist high planter box is to remove the staples from the boards. I have no idea why, but just about every board had staples in it.

    The base is built from 3 of the 8″ wide by 6ft longboards. The boards are joined together using pocket hole joinery. Which is a quick way to make really strong joints. On one edge of 6ft x 8″ board, set the Kreg Jig for 3/4″ and make a pocket at 8-inch intervals.

    DIYWaistHighPlanter02
    DIYWaistHighPlanter03

    Then slide a second board next to the first and use a clamp to align the left edge and keep the boards together.

    DIYWaistHighPlanter04

    Set the torque adjustment on the screwdriver to prevent stripping the screw out. You can practice on a piece of scrap to get the torque setting right. Cedar is very soft so keep the torque low. Screw in the first 1-1/4″ exterior self-tapping screw. Work your way down the board until you have all the 1-1/4″ exterior self-tapping screws in.

    DIYWaistHighPlanter05

    Now make pocket holes on the 3rd 6ftx8″ board and screw to the first 2 boards so that you have a base 3 boards wide by 6ft long. All the boards are aligned on the left edge.

    If the wood is not all exactly 6 feet long, the right end will be a bit raggedy. If this is too extreme, you can use a handheld circular saw to trim the far end flush. In my case, the boards were all +/- 1/8 inch so I let them be.

    DIYWaistHighPlanter06

    Now it’s time to do the long vertical sides. Make pocket holes every 8 inches along one edge of each of the two 6ft by 8″ sideboards. It is useful to clamp the sideboard to the base panel to keep it properly aligned while you screw the side to the base. Make sure you keep the left edges aligned with the base.

    The 8″ boards are not exactly 8″ wide so use a tape measure to measure the inside distance between the 2 side boards. You should have 2 off-cuts from the original 8″ boards that you can use as the end boards. They will need to be cut down on the table saw to match your inner measurement. In my case, the end boards need to be cut to 20″.

    DIYWaistHighPlanter07

    Do not cross-cut the boards on a table saw with the fence in place. This is very dangerous. Measure the cut length using the fence and then move the fence out of the way before making the cut. Alternately, you can insert a 0.75″ thick piece of wood between the edge of the end board and the fence of your DIY waist high planter box, measure up, and then slide the 0.75″ piece of wood out of the way so that the edge of your board clears the fence.

    If you cross-cut with the fence in place the board can get wedged leading to damage to the saw, the board, and most importantly yourself.

    DIYWaistHighPlanter08

    With the basic planter box complete, the depth is not sufficient for vegetables, so we need to extend the sides of the planter box upward. This is what the 1×4 Cedar boards are for. They will give us an overall inner depth of 10 3/4″ which is plenty for the veggies.

    DIYWaistHighPlanter09

    The process of attaching the 1x4x6ft extensions for the planter box is the same as attaching the 8″ side panels. Make pocket holes every 8 inches. Then clamp the 1x4x6ft piece to the top edge of the 8″ side board and use the 1-1/4″ self-tapping screws to attach the 4″ board to the 8″ board.

    Theoretically, 4″+8″ = 12″ but lumber dimensions are measured before drying so when lumber gets dried, it shrinks. The final size is always smaller than stated. For example, a 2×4 is actually 1.5″ x 3.5″

    The ends are attached in the same fashion. Drill pockets on the 3 sides as shown in the photo. A lot of pockets but we want the board to withstand the pressure of the soil.

    DIYWaistHighPlanter10

    With the remaining lumber, the long 6ft piece of 1×4 was ripped down to two 1-1/4″ wide pieces and screwed to the side of the box both for decoration and to conceal the join between the 8″ and 4″ wide pieces. The Kreg pocket hole drill does a great job of drilling a counterbored hole.

    DIYWaistHighPlanter14

    These holes were drilled every foot. The added benefit of these strips is that they will strengthen the boards and help to reduce flexing due to the weight of the soil and water. The base frame will help with this also but we will get to the frame later.

    DIYWaistHighPlanter11
    DIYWaistHighPlanter15

    At this point, the planter box should be complete. You can take a break if you wish. Or you can start building the base frame of your planter box.

    DIYWaistHighPlanter13
    DIYWaistHighPlanter16

    The frame legs consist of 2 different lengths 2×4’s: 19″ and 24-1/2″  Use a mitre saw or table saw to cut the 2×4’s to length. You will need a total of 6 legs. Each 2×4 will give you 3 x 24-1/2 pieces and 1 x 19″ pieces. So 2 x 2×4 will give you all the long leg pieces and another 2×4 will give you the remaining 19″ pieces. Keep cutting until you have 6 of each length.

    DIYWaistHighPlanter17

    Now take a 19″ piece and 24-1/2″ piece and glue them together with wood glue.

    DIYWaistHighPlanter18

    Clamp them together to prevent them from moving and counterbore holes on the 19″ side. Then use the 2-1/2″ Kreg all-weather screws to screw them together. I used 4 screws per leg for the first couple of legs and then dropped to 3. I think 3 is plenty since the faces are glued together.

    DIYWaistHighPlanter19

    The Box will be resting on the edge of the 19″ piece which is very sturdy. The extended height of the 24-1/2 piece will provide support to the long vertical sides of the box keeping them from bowing out under the weight of soil and water. Practically the sides of the box are plenty strong but I don’t take chances and the 2x4s are cheap insurance. Keep gluing and screwing until you have 6 legs prepared.

    DIYWaistHighPlanter20

    Now turn the planter box over so that the bottom faces skyward. We will assemble the rest of the frame in-situ.

    Each set of two legs gets attached with a 19″ cross piece. With the remaining 2×4 you will need to cut as follows:

    5 x 19″ long pieces for cross bracing.
    4 x 28″ pieces for rails across the front and back. Don’t cut these until last. Measure your actual dimensions and cut accordingly because if you don’t get the 30″ pieces exactly right, you can compensate by adjusting the length of these pieces.
    2 x 30″ pieces for the top.

    DIYWaistHighPlanter21

    Attach the legs of your waist high planter box to each other using 3 pocket holes and glue on either end.

    DIYWaistHighPlanter22

    When you are done, you will have 3 leg pairs.

    DIYWaistHighPlanter23

    Now make 3 pocket holes on each end of the 30″ pieces and use these to join the legs together. Use glue in all joints and use the 2-1/2″ Kreg screws. A box of 50 screws will not cut it…. buy 100 screws (you get 50 per box).

    DIYWaistHighPlanter24
    DIYWaistHighPlanter25

    Now measure the spacing between the legs of your planter box and cut your final rails to match this measurement. It should be around 28″ but you may need adjustment depending on the accuracy of your 30″ cuts. These are screwed and glued in place 6 inches from the bottom ends (see drawing side view).

    DIYWaistHighPlanter26

    With everything screwed together, you now have a rock-solid sturdy frame for your waist hight planter box that will carry a ton of weight. Most of the weight is carried by the vertical 19″ 2×4 which is the secret to the strength of this design. At least I like to think so! Try breaking a short 2×4… This DIY waist high planter box is very strong.

    DIYWaistHighPlanter27
    DIYWaistHighPlanter28

    With the remaining Cedar off-cuts, I made a bunch of “feet” for the legs. This will isolate the pine from ground contact and improve the rot resistance. A 4×4 share of cedar will work fine. You do not have to be precise here.

    DIYWaistHighPlanter29
    DIYWaistHighPlanter30

    Drainage holes were cut at roughly 8″ intervals using a 5/8″ Forstner bit.

    DIYWaistHighPlanter31

    I made a mistake and cut a set of holes roughly down the middle, slightly to the side of the main beam that runs lengthways across the bottom. A later decision to run gutters to catch overflow resulted in me having to plug the center holes because there wasn’t enough space to install the gutters.

    DIYWaistHighPlanter32

    To capture the overflow from the drainage holes, the cross beams of the waist high planter box frame were notched to accept one-half of a 2″ PVC pipe. The PVC pipe was cut using a table saw. Please be very careful doing this and use a push stick so that your fingers are far away from the blade at all times.

    DIYWaistHighPlanter33

    A pipe cap was also slit in 2 and glued to the ends to ensure overflow always runs out of one end (within reason….. install with a slight tilt to the side you want to drain out of)

    DIYWaistHighPlanter35

    The notches were drawn onto the cross beams using the slit PVC pipe end as a template and then a jig saw was used to cut the notches. The cuts were smoothed using a rasp and then a file.  The slit PVC tube sits slightly below the surface so that there is a small air gap between the bottom of the bed and the PVC tube. This should help things stay dry and prevent mould growth.

    DIYWaistHighPlanter34
    DIYWaistHighPlanter36
    DIYWaistHighPlanter38

    The shelf consists of 3 2×4 pieces that are screwed to the lower rails on either side. The shelf pieces are 20-1/2″ long. Your measurement may vary if your rails are not exactly centered with respect to the legs. Measure your actual length and cut accordingly. Working this way allows you to make adjustments as you go. If you cut all the wood up front, you have to be very careful to get everything exactly right. Cutting a little later, allows you to correct for inevitable imperfections – this is handmade after all.

    DIYWaistHighPlanter37
    DIYWaistHighPlanter39

    The final staining was done using Olympic 6-year deck stain. Only the frame was stained. The waist high planter box was left natural so as not to contaminate the vegetables. A weight test was conducted – It handles 200 pounds with no problem. The volume of the waist high planter box is roughly 12 cubic feet. The density of potting soil wet is roughly 50 lbs / cubic foot (web sources – not sure how accurate this is ). This means the frame will be supporting 600 lbs of soil. Each leg will therefore support 100.

    DIYWaistHighPlanter40

    Aside from the benefits you and your plants get, this waist high planter box also makes it possible for you to easily relocate your garden in case you need to. Is it exposed to too much sunlight? Does it get ruined by kids playing around? Or maybe you need a little more extra space for your outdoor party? No problem.

    This waist high planter takes away all the hassles of gardening!

    Thanks to MidnightMaker for this clever waist high planter box project!

    Are you ready to make your waist high planter box? Just follow the strategies and precautions and you’re good to go. This waist high planter box will make things easy.

    YOU MIGHT ALSO LIKE

    |

    Search All Projects:

    |

    Our Deal For Today!

    Your details will never be shared with any third party. Unsubscribe at any time with a single click.

    The posts on this site sometimes contain an affiliate link or links to Amazon or other marketplaces. An affiliate link means that this business may earn advertising or referral fees if you make a purchase through those links.